Shop Database

Aviation Terms Glossary Q

Aviation Terms Glossary – Q

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Click here for corrections and content addition requests

Aviation Glossary – A
Q-code Q-codes are standardized three-letter codes used in aviation communication and navigation. Originating from Morse code days, they convey specific meanings such as QNH (local pressure setting) or QFE (field elevation pressure). These codes simplify complex messages, especially during international and multi-language operations. Q-code
Q-Factor (Navigation) The Q-factor refers to the quality factor of a navigational signal, assessing its reliability and accuracy. It is critical in aviation to ensure precise GPS readings, particularly for approaches and landings in low-visibility conditions. Q-Factor
QFE (Field Elevation Pressure) QFE is the atmospheric pressure at an airport’s elevation. When set on the aircraft altimeter, it displays height above the field level, useful for landing operations. It ensures accurate altitude readings relative to the runway during the approach. QFE
QNH (Local Pressure Setting) QNH is the atmospheric pressure adjusted to mean sea level at a specific location. Setting QNH on an aircraft’s altimeter ensures accurate altitude readings relative to sea level, essential for maintaining vertical separation. QNH
Quadrant Identifier A quadrant identifier is a designated airspace sector used by air traffic controllers to manage and direct aircraft. It simplifies navigation and traffic management by dividing airspace into easily recognizable areas. Quadrant Identifier
Quadrant Navigation Quadrant navigation involves dividing an area into four sectors for route planning and air traffic management. This method is particularly useful in busy airspaces to ensure efficient traffic flow and conflict resolution. Quadrant Navigation
Qualification Check A qualification check is a mandatory assessment for pilots to verify their proficiency and compliance with aviation regulations. It includes simulator tests, practical flight evaluations, and knowledge exams to ensure operational readiness. Qualification Check
Qualified Pilot Examiner (QPE) A QPE is an authorized individual responsible for conducting pilot proficiency checks and issuing certifications. They evaluate a pilot’s skills, knowledge, and adherence to regulations during flight or simulator tests. Qualified Pilot Examiner
Quantum Radar (Aviation) Quantum radar is an emerging technology that uses quantum mechanics to enhance radar detection. It promises improved sensitivity and resistance to electronic jamming, making it valuable for military and civilian aviation. Quantum Radar
Quantum Sensor Quantum sensors in aviation use quantum technology to measure physical phenomena such as gravitational fields or magnetic forces. They improve navigation accuracy, particularly in GPS-denied environments or challenging conditions. Quantum Sensor
Quarantine Procedures (Aviation) Quarantine procedures ensure the isolation of aircraft, passengers, or cargo exposed to infectious diseases or pests. These measures prevent the spread of harmful agents and comply with international health regulations. Quarantine Procedures
Quasi-Steady Flight Quasi-steady flight refers to a flight condition where an aircraft maintains a nearly constant speed, altitude, and attitude. It is ideal for fuel-efficient cruising and minimizes wear on aircraft systems. Quasi-Steady Flight
Quick Access Recorder (QAR) A QAR is a device that records flight data for operational analysis and safety monitoring. Unlike a black box, its data is easily retrievable for quick review by maintenance and safety teams. Quick Access Recorder
Quick Donning Mask A quick-donning mask is an oxygen mask designed for pilots, enabling rapid deployment in emergencies. It ensures immediate oxygen supply during cabin depressurization or smoke events. Quick Donning Mask
Quick Reference Handbook (QRH) The QRH is a cockpit manual containing essential procedures for abnormal or emergency situations. Pilots use it to quickly access step-by-step instructions, ensuring timely and accurate responses. Quick Reference Handbook
Quiet Supersonic Technology (QST) QST is a cutting-edge development in aircraft design aimed at reducing the sonic boom impact of supersonic travel. This technology enables faster-than-sound travel while minimizing environmental and noise pollution. Quiet Supersonic Technology
Quiet Taxi Operations Quiet taxi operations involve minimizing engine noise during taxiing by using electric ground power units or low-thrust settings. These practices enhance airport noise management and fuel efficiency. Quiet Taxi Operations
Quill Shaft (Engine Component) A quill shaft is a flexible coupling used in aircraft engines to absorb torsional vibrations between components. It protects the engine and transmission systems from damage caused by mechanical stress. Quill Shaft
Q-Pole (Magnetic Navigation) The Q-pole represents a theoretical magnetic point used in navigation to calibrate instruments or align with specific magnetic fields for directional accuracy. Q-Pole
QTE (True Bearing to a Station) QTE is the true bearing from an aircraft to a navigation station. It helps pilots and navigators determine their exact position relative to a ground-based beacon. QTE
QTF (True Bearing from a Station) QTF is the true bearing from a navigation station to an aircraft. It is complementary to QTE and aids in precise navigation and situational awareness. QTF
QDM (Magnetic Bearing to a Station) QDM represents the magnetic bearing to a radio navigation station. It assists in direction finding and route alignment during en-route or approach phases. QDM
QDR (Magnetic Bearing from a Station) QDR is the magnetic bearing from a radio navigation station to the aircraft. It complements QDM and helps pilots determine their position relative to the station. QDR
Quality Assurance in Maintenance Quality assurance in aviation maintenance ensures that all repairs, inspections, and modifications meet regulatory and manufacturer standards. It is critical for operational safety and compliance. Quality Assurance
Quality Management System (QMS) A QMS in aviation oversees processes to maintain high safety, efficiency, and service standards. Airlines and maintenance facilities use QMS to ensure consistent operational quality. Quality Management System
Quenching (Metalwork in Aircraft) Quenching involves rapidly cooling metals to enhance their hardness and durability. It is commonly used in aircraft manufacturing to improve the structural strength of components. Quenching
Quiescent Flight Quiescent flight refers to steady-state conditions with minimal turbulence or disturbances. It allows for optimal fuel efficiency, stable navigation, and passenger comfort. Quiescent Flight
Quiet Runway Operations Quiet runway operations reduce noise impact by implementing procedures like optimized flight paths, continuous descent approaches, and restricting late-night departures. Quiet Runway Operations
Quartering Headwind A quartering headwind strikes the aircraft from a forward diagonal direction. It affects takeoff, landing, and taxi operations, requiring pilots to adjust control inputs for stability. Quartering Headwind
Quartering Tailwind A quartering tailwind strikes the aircraft from a rear diagonal direction. It increases ground speed during landing and takeoff, potentially reducing control effectiveness and requiring pilot compensation. Quartering Tailwind
SHOP